Extreme Slot-Cars Lubricant (10ml)

Name: Extreme Slot-Cars Lubricant (10ml)
Brand: DryFluids
Price: 13.2 EUR
Availability: In Stock

Limited Stock!

1 watch this article

SKU: DF031

GTIN: 4260269080311

Available Directly
stock location: Main Warehouse (Headquarter)
Ready for Shipment in: 0 - 1 Workdays
(DE - int. shipments may differ)

13,20 €

1.320,00 € per 1 l

Final price* , plus

pcs.

This bundle is now in the shopping cart.

Buy them in bundle:

Extreme Slot-Cars Lubricant (10ml)

Bike Lubricant for Chains (50 ml)

Hobby-Messer mit 5 Klingen

Extreme Slot-Cars Lubricant (10ml) (13,20 €)

Bike Lubricant for Chains (50 ml) (21,80 €)

Hobby-Messer mit 5 Klingen (7,30 €)

HIGH POWER FLUID FOR MORE SPEED

DryFluid Extreme Slot was specially developed for slot cars with the aim of optimising the speed of these miniature racers.
The effect of this new slide lubricant begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were
the main objectives.
The newest developments in the aviation and vehicle industries and the expert knowledge of top-flight slot car drivers are the driving forces behind this innovative lubricant.

SLIDE LUBRICANT INSTEAD OF OIL

DryFluid is a dry lubricant rather than a classic grease.
DryFluid is not wax; it is neither greasy nor oily but it is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high-end sliding fluids. Additionally, it is dust and dirt repellent. Every slot car owner will appreciate the performance-enhancing lubrication of DryFluid Extreme.

PRODUCT FEATURES:

Reduction of power loss on axles and bearings
Lowest sliding friction for free movement and wear reduction
Multistage lubricant system with immediate and long-term effects
Dust and dirt repellent
Extremely good creeping abilities
Excellent material compatibility with all current metal, plastic and natural rubber materials
Outstanding adhesive and anti-corrosive properties Gain the advantage with DryFluid Extreme

High end slide lubricant for axles, bearings and guides of slot cars.
It contains top-class lubricating components from the aviation and vehicle industry. Extremely low friction coefficient. Excellent long-term lubrication results.
Shake well before use!

DRYFLUID EXTREME SLOT

Innovative high speed lubricant for axles, bearings and gearwheels of Slot Cars. It contains top-class lubricating components from the aviation and vehicle industry. It increases the speed through extreme low sliding friction. Dust and dirt repellent. Excellent long-term lubrication results.
It includes a pinpoint dispenser and a separate fine cannula for a very precise application.

Content 10 ml

Product Group:	Schmierstoffe / Fette
Content:	10,00 ml

1. Allgemeine Daten:

Produktbezeichnung: DryFluid Exreme Slot Cars

Farbe:
Flüssiger Zustand: weißlich transparent
Ruhezustand: Weiß

Dichte:
Im flüssigen Zustand: 0,80 g/cm³
Im trockenen Zustand: 1,09 g/cm³

Siedepunkt flüssig: 82 Grad Celsius

Viskosität:
Im flüssigen Zustand (20 Grad Celsius): 2,3 mPa s
Im trockenen Zustand: Nicht bestimmt

Temperaturbereich:
Temperaturfestigkeit: - 50 Grad Celsius bis 160 Grad Celsius
Empfohlener Temperaturbereich: - 20 Grad Celsius bis 120 Grad Celsius

Spezifischer elektrischer Widerstand:
Messung im trockenen Zustand nach DIN EN 50359

Komponente Microkeramik: 10 E+12 Ohm x cm
Komponente Kunststoff-Gleitpolymer: 10 E+16 Ohm x cm
Komponente Gleitfluid: 1,2 x 10 E+3 Ohm x cm
Gesamtleitfähigkeit: > 1,5 x 10 E+3 Ohm x cm

2. Schmierstoffeigenschaften:

Druckfestigkeit nach DIN 51347: 270 N/mm²

Reibeigenschaften im Kugel-/Scheibe-Test:

Reibungskoeffizient : 0,13

Verschleißwerte :
Kugel: 57,6 Mikrometer
Scheibe: 85,4 Mikrometer

Prüfinstitut Kugel-/Scheibe-Test: Fraunhofer Institut für Schicht- und Oberflächentechnik
Prüfparameter: Prüflast = 300 g, Kugeldurchmesser = 5 mm, Reibspurdurchmesser = 27 mm, Drehzahl = 30 min-1 (? 0,044 m/s), Prüfdauer = 60 min, Reibstrecke = 158,4 m
Scheibe: Werkstoff: 100Cr6, Abmessung: d = 5mm, ø = 35mm, Oberflächengüte: poliert (Ra< 0,05 µm)
Kugelwerkstoffe: 100Cr6