Extreme RC Heli Lubricant (10 ml)

Limited Stock!

1 watch this article

SKU: DF051

GTIN: 4260269080519

Available Directly
stock location: Main Warehouse (Headquarter)
Ready for Shipment in: 0 - 1 Workdays
(DE - int. shipments may differ)

13,20 €

1.320,00 € per 1 l

Final price* , plus

pcs.

This bundle is now in the shopping cart.

Buy them in bundle:

Extreme RC Heli Lubricant (10 ml)

Bike Lubricant for Chains (50 ml)

Skate Highspeed Lubricant (10 ml)

Extreme RC Heli Lubricant (10 ml) (13,20 €)

Bike Lubricant for Chains (50 ml) (21,80 €)

Skate Highspeed Lubricant (10 ml) (13,20 €)

BALSAM FOR RC HELICOPTERS

DryFluid Extreme was specially developed for radio controlled model helicopters with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels. The effect of this new slide-lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC Heli pilots are the driving forces behind this new lubricant.

SLIDE-LUBRICANT INSTEAD OF OIL

DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will interest every RC pilot.

PRODUCT-FEATURES

Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components
Lowest sliding friction for free movement and wear reduction
Multistage lubricant system with immediate and long-term effects
Dust and dirt repellent
Extremely good creeping abilities
Excellent material compatibility with all current metal, plastic and natural rubber materials
Outstanding adhesive and anti-corrosive properties

See for yourself the amazing effect of using DryFluid Extreme Heli.
High End slide-lubricant for links, shafts and bearings of RC
helicopters. It contains top-class lubricating components from the aviation and vehicle industry. Extremely low friction coefficient. Excellent long-term lubrication results.
Shake well before use!

DRYFLUID EXTREME HELI

High end lubricant for joints, axles and bearings of RC Helicopters. It contains top-class lubricating components from the aviation and vehicle industry. It increases the speed through extreme low sliding friction. Dust and dirt repellent. Excellent long-term lubrication results. It includes a pinpoint dispenser and a separate fine cannula for a very precise application.

Content 10 ml

Product Group:	Schmierstoffe / Fette
Content:	10,00 ml

1. Allgemeine Daten:

Produktbezeichnung: DryFluid Exreme Heli

Farbe:
Flüssiger Zustand: weißlich transparent
Ruhezustand: Weiß

Dichte:
Im flüssigen Zustand: 0,80 g/cm³
Im trockenen Zustand: 1,09 g/cm³

Siedepunkt flüssig: 82 Grad Celsius

Viskosität:
Im flüssigen Zustand (20 Grad Celsius): 2,5 mPa s
Im trockenen Zustand: Nicht bestimmt

Temperaturbereich:
Temperaturfestigkeit: - 50 Grad Celsius bis 160 Grad Celsius
Empfohlener Temperaturbereich: - 20 Grad Celsius bis 120 Grad Celsius

Spezifischer elektrischer Widerstand:
Messung im trockenen Zustand nach DIN EN 50359

Komponente Microkeramik: 10 E+12 Ohm x cm
Komponente Kunststoff-Gleitpolymer: 10 E+16 Ohm x cm
Komponente Gleitfluid: 1,2 x 10 E+3 Ohm x cm
Gesamtleitfähigkeit: > 1,5 x 10 E+3 Ohm x cm

2. Schmierstoffeigenschaften:

Druckfestigkeit nach DIN 51347: 270 N/mm²

Reibeigenschaften im Kugel-/Scheibe-Test:

Reibungskoeffizient : 0,13

Verschleißwerte :
Kugel: 57,6 Mikrometer
Scheibe: 85,4 Mikrometer

Prüfinstitut Kugel-/Scheibe-Test: Fraunhofer Institut für Schicht- und Oberflächentechnik
Prüfparameter: Prüflast = 300 g, Kugeldurchmesser = 5 mm, Reibspurdurchmesser = 27 mm, Drehzahl = 30 min-1 (? 0,044 m/s), Prüfdauer = 60 min, Reibstrecke = 158,4 m
Scheibe: Werkstoff: 100Cr6, Abmessung: d = 5mm, ø = 35mm, Oberflächengüte: poliert (Ra< 0,05 µm)
Kugelwerkstoffe: 100Cr6

Anwendungsvideo DryFluid Extreme Heli -Gleiten statt Schmieren